should be performed by a Yamaha dealer.
1
EBU24872
Drive chain slack
2
The drive chain slack should be checked before
each ride and adjusted if necessary.
3
To check the drive chain slack
4
1. Place the ATV on a level surface.
5
TIP
When checking and adjusting the drive chain
6
slack, there should be no weight on the ATV and
all tires must be touching the ground.
7
2. Move the ATV back and forth to locate the
tightest portion of the drive chain, and then
8
measure the drive chain slack as shown.
9
Drive chain slack:
30.0 mm (1.18 in)
10
11
1. Drive chain slack
3. If the drive chain slack is incorrect, adjust it as
follows.
To adjust the drive chain slack
1. Place the ATV on a level surface.
2. Loosen the hub stopper bolt locknut and then
the hub stopper bolt.
3. Loosen the axle holding bolts.
8-32
1