Operation
2
1. Fuel joint
2. Fuel hose
EMU27865
Trimming outboard motor
EWM00741
WARNING
Excessive trim for the operating condi-
tions (either trim up or trim down) can
cause boat instability and can make steer-
ing the boat more difficult. This increases
the possibility of an accident. If the boat
begins to feel unstable or is hard to steer,
slow down and/or readjust the trim angle.
The trim angle of the outboard motor helps
determine the position of the bow of the boat
in the water. Correct trim angle will help im-
prove performance and fuel economy while
reducing strain on the engine. Correct trim
angle depends upon the combination of
boat, engine, and propeller. Correct trim is
also affected by variables such as the load in
the boat, sea conditions, and running speed.
46
1
ZMU07443
EMU39273
Adjusting trim angle for manual tilt
models
EWM00401
Stop the engine before adjusting the
Use care to avoid being pinched when
Use caution when trying a trim position
There are 5 holes provided in the clamp
bracket to adjust the outboard motor trim an-
gle.
1.
1. Trim operating angle
WARNING
trim angle.
removing or installing the rod.
for the first time. Increase speed gradu-
ally and watch for any signs of instability
or control problems. Improper trim an-
gle can cause loss of control.
Stop the engine.
1
ZMU06754