Yamaha FJR1300A Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
G
To reset the average fuel con-
sumption display, push the "RE-
SET" button to select the mode
again, and then push the "RESET"
button for 1 second while the dis-
play is flashing.
G
After resetting the average fuel
3
consumption display, "_ _._" will
be shown for that display until the
vehicle has traveled 1 km (0.6 mi).
CAUTION:
If there is a malfunction, "– –.–" will
be displayed. Have a Yamaha dealer
check the vehicle.
Self-diagnosis device
1. Error code display
2. Immobilizer system indicator light
ECA15472
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the multi-function display
will indicate a two-digit error code.
If the multi-function display indicates
such an error code, note the code num-
ber, and then have a Yamaha dealer
check the vehicle.
3-12
CAUTION:
If the multi-function display indi-
cates an error code, the vehicle
should be checked as soon as pos-
sible in order to avoid engine dam-
age.
This model is also equipped with a self-
diagnosis device for the immobilizer
system.
If any of the immobilizer system circuits
are defective, the immobilizer system
indicator light will flash, and then the
multi-function display will indicate a
two-digit error code when the key is
turned to "ON".
NOTE:
If the multi-function display indicates er-
ror code 52, this could be caused by
transponder interference. If this error
appears, try the following.
1. Use the code re-registering key to
start the engine.
NOTE:
Make sure there are no other immobi-
lizer keys close to the main switch, and
do not keep more than one immobilizer
ECA11790