Multi-Function Display - Yamaha GRIZZLY YFM70GPXH Owner's Manual

EBU30498

Multi-function display

1
2
3
7
1. "SELECT" button
2. "RESET" button
3. "CLOCK" button
4. Speedometer
5. Fuel gauge
6. Clock/Hour meter
7. Odometer/Tripmeter A/Tripmeter B
The multi-function display is equipped with the
following:
 speedometer
 odometer
 two tripmeters
 clock
 hour meter
4 5
6
 fuel gauge
 error code display
Speedometer
The speedometer shows the vehicle's traveling
speed. The speedometer can be set to "mph" or
"km/h". This also changes the odometer and trip-
meter units between miles and kilometers. To
change the display between "mph" and "km/h",
turn the key to "
"SELECT" button pushed, turn the key to "
(on).
Odometer and tripmeters
The odometer shows the total distance traveled
by the vehicle. The odometer can be used for
maintenance and service intervals.
The tripmeters show the distance traveled since
they were last reset. The tripmeters can be used to
record the distance traveled on a single trip, or to
estimate the distance that can be traveled with a
full tank of gas, etc.
Push the "SELECT" button to switch between the
odometer "ODO" and the tripmeters "TRIP A" and
"TRIP B" in the following order:
ODO → TRIP A → TRIP B → ODO
4-5
" (off), then while holding the
4
"