Auxiliary Dc Jack - Yamaha VERSITY 300 VP300 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Auxiliary DC jack

3
ZAUM0417
1. Auxiliary DC jack
This scooter is equipped with an auxil-
iary DC jack in the storage compart-
ment.
12-V accessories connected to the
auxiliary jack can be used when the key
is in the " " position and should only
be used when the engine is running.
CAUTION:
The accessories connected to the
auxiliary DC terminals should not be
used with the engine turned off, and
their combined load must never ex-
ceed 2.5 A or 30 W, otherwise the
battery may discharge.
EAUM2000 To use the auxiliary DC jack
1. Turn the key to "
2. Remove the dust cap from the re-
ceptacle.
12V
3. Insert the accessory plug into the
receptacle.
4. Turn the key to "
the engine. (See page 5-1.)
1
5. When the accessory jack is not be-
ing used, make sure that the dust
cap is installed onto the receptacle
for protection.
ECA10200
".
", and then start
3-17