Front Wheel - Yamaha YBR125ESD Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT

Front wheel

To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Disconnect the speedometer ca-
ble from the front wheel.
6
1. Speedometer cable
3. Remove the rubber cap, and then
the axle nut and the washer.
EAU24360
EAU47720
EWA10821
1. Rubber cap
2. Axle nut
3. Washer
4. Pull the wheel axle out, and then
remove the wheel. NOTICE: Do
not apply the brake after the
wheel has been removed to-
gether with the brake disc, oth-
erwise the brake pads will be
forced shut.
1. Wheel axle
To install the front wheel
1. Install the speedometer gear unit
[ECA11071]
1. Speedometer gear unit
2. Lift the wheel up between the fork
6-33
into the wheel hub so that the pro-
jections mesh with the slots.
legs.
1
EAU49100