1. Screw
2. Remove the defective bulb by pushing it in
and turning it counterclockwise.
3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screw.
ECB00870
CAUTION:
Do not overtighten the screw, otherwise the
lens may break.
EBU28181
Replacing the license plate light bulb
If the license plate light bulb burns out, replace it as
follows.
1. Remove the license plate light body by remov-
ing the screw.
1. Screw
2. License plate light body
2. Remove the socket (together with the bulb).
8-39
8