Step 5: Insert the HDD into the Cartridge Casing
Step 6: Secure the HDD in the cartridge casing.
Step 7: Slide the top Cover over the Cartridge Casing
Step 8: Lock the Cartridge
•
To Lock the cabinet, turn the key clockwise to Position A.
•
To unlock the cabinet, turn the key counter-clockwise to Position B.
NOTE: The DGR116 will not function if the key is not in the locked position.
Take the Hard Disk Drive and connect the two cables from the back
of the Cartridge Casing to the HDD.
The cables should be pushed in firmly, but not forcibly.
Position the HDD into place and secure it using the six
screws supplied.
Slide the Cover forward over the Cartridge Case. Ensure it is
secured in place over the release latch.
Reinsert the Cartridge Casing into the DGR116
3