Canceling The Programme; End Of Programme - Beko DPU 7360 X User Manual

Adding / removing laundry in Pause
mode
In order to add or take out laundry after the
drying programme has started:
1. Press Start / Pause / Cancel button to
switch the machine to Pause mode.
Drying process will stop.
2. While in Pause mode, open the loading
door, add or take out laundry and close
the loading door.
3. Press Start / Pause / Cancel button to
start the programme.
C
Any laundry added after the
drying process has started may
cause the clothes that are already
dried in the machine intermingle
with wet clothes and the result
will be wet laundry after the dry-
ing process is over.
C
You may repeat laundry adding
or removing process as many
times as you desire during dry-
ing. However, this process will
increase the programme time and
energy consumption since the
drying process will be interrupted
repeatedly. Therefore, it is recom-
mended to add laundry before the
drying programme has started.
C
If you select a new programme by
turning the Programme Selection
knob while your machine is in
Pause mode, then the current
program is aborted and new pro-
gramme information is displayed.
Do not touch the inner surface of
the drum when adding or taking
out laundry while a programme
is running. Surfaces of the drum
are hot.

5.13 Canceling the programme

If you want to stop drying and cancel the
programme for any reason after the ma-
chine has started to run, press and hold the
Start / Pause / Cancel button for 3 seconds.
Lint Filter Cleaning and Water Tank warning
symbols light up and "End" label appears on
the display as a reminder at the end of this
period.
Dryer / User Manual
A
As the inside of the machine will
be excessively hot when you
cancel the programme while the
machine is running, activate the
ventilation program to cool it
down.
C
Machine will stop if you turn the
Programme Selection knob while
it is operating. In this case, cur-
rent programme is aborted and
the new programme information
appears on the display.

5.14 End of programme

Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator and "End" label appears on the dis-
play when the programme comes to an end.
The loading door can be opened and the ma-
chine becomes ready for a second cycle.
Press On / Off button to switch off the ma-
chine.
C
If Anti-creasing function is
activated and the laundry is not
taken from the machine at the
end of the programme, 2-hours
Anti-creasing programme is
activated.
C
Clean the lint filter after each
drying. (See "Lint Filter / Loading
Door Inner Surface")
C
Drain the water tank after each
drying cycle. (See "Draining the
water tank")
23 / EN