Channel Scroll (Auto); Min/Max (View, Reset); View Min/Max; Reset Min/Max - La Crosse Technology 308A-146 Instruction Manual

Hide thumbs Also See for 308A-146:

User manual (7 pages)

Table Of Contents

Table of Contents

3. Set the second outdoor sensor to Channel 2 and insert 2-AA batteries.

4. Set the third outdoor sensor to Channel 3 and insert 2-AA batteries.

5. Press and hold CH button on the forecast station until a beep sounds. The forecast

station will search for all outdoor sensors.

6. Press the TX button on the back of each outdoor sensor to transmit RF signal.

7. When RF connection is established, the respective temperature & humidity for each of

the selected channels will appear on the main unit.

8. Allow the sensors and the forecast station to stay 5-10 feet apart for 15 minutes to

establish a solid connection.

9. Install the battery covers on each sensor.

10.After 15 minutes place the outdoor sensors in appropriate locations (see "position the

outdoor sensor").

Press and release the CH button to view channel 1, 2 or 3 on the forecast station when

multiple sensors are used.

Note: You cannot change channels if only one sensor is connected.

Press and release the CH button until the word AUTO appears in the outdoor data

area. The forecast station will automatically rotate through the channels for all

connected sensors.

Press and release the CH button to lock the forecast station into one channel. Then view

channels individually with a press of the CH button.

This forecast station features daily minimum and maximum temperatures each day

starting at midnight (12:00 AM). The forecast station automatically resets the

min/max temperatures at midnight (12:00 AM).

 MAX: From a normal display press and release the MIN/MAX button once to view

maximum temperature and humidity values for Indoor and Outdoor data. The word

MAX will appear next to the indoor and outdoor temperature.

 MIN: From a normal display press and release the MIN/MAX button twice to view

minimum temperature and humidity values for Indoor or Outdoor data. The word MIN

will appear next to the indoor and outdoor temperature.

Hold the MIN/MAX button for 5 seconds to manually reset all indoor and outdoor

minimum and maximum values. (The forecast station automatically resets the min/max

temperatures at midnight: 12:00 AM).

Low battery icon for forecast station or outdoor sensor.



If the icon is displayed in the Outdoor Temperature section, replace batteries in

the outdoor sensor.



If the icon is displayed in the Indoor Temperature section, replace batteries in

the forecast station.

Model: 308A-146