JVC LX-FH50 User Manual page 22

Tint
Sharpness
Color
Temperature
3D Color
Management
22 Menu Functions
Adjusts the red and green color tones of the picture.
The higher the value, the more reddish the picture becomes. The lower the
value, the more greenish the picture becomes.
This function is only available when a Video or S-Video signal is selected and
the system format is NTSC.
Makes the picture look sharper or softer.
4
The options available for color temperature settings vary according to the
connected input signal.
• High: Makes pictures appear bluish white.
• Middle: Maintains normal colorings for white.
• Low: Makes pictures appear reddish white.
Provides six sets (RGBCMY) of colors to be adjusted. You can select any of
them to adjust its color range and saturation.
1. Press ENTER to display the 3D Color Management window.
2. Select Select Color and use
(Green), B (Blue), C (Cyan), M (Magenta), and Y (Yellow).
3. Press to select Hue and use
will include colors consisted of more proportions of its two adjacent colors.
Yellow Green
Red
Cyan
Magenta
Blue
4. Press to select Saturation* and use
adjustment made reflects to the image immediately. For example, if you
select R and set its value at 0, only the saturation of pure red will be
affected.
5. Press to select Brightness and use
adjustment made reflects to the image immediately. For example, if you
select R and set its value at 0, only the brightness of pure red will be
affected.
6. Repeat steps 2 to 5 until you have made all of the desired adjustments.
7. When done, press MENU to exit.
*About saturation
It is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of "0" removes that color from the image entirely. If
the saturation is too high, that color will be overpowering and unrealistic.
The higher the value, the sharper
the picture becomes. The lower
the value, the softer the picture
becomes.
7 12
/ to select a color from R (Red), G
/ to set its range. Increase in the range
The illustration shows how the colors relate to
each other.
For example, if you select R and set its range at
0, only pure red is selected. Increasing its range
will include both the red color close to yellow and
red color close to magenta.
/
/
to adjust its values. Every
to adjust its values. Every