28
Chapter 2
Preparation for use
Connecting with an analog video source
Analog connection:
1
Connect a signal cable (VGA or YPbPr cable), to the VGA or AV IN connector.
2
Select AV, Component, or VGA using the SOURCE button on the LCD display, or the SOURCE button on the
infrared remote control. Once selected, the audio automatically switches to [LINE IN].
Audio connection:
•
Connect an audio cable (ø3.5-mm stereo mini) (commercially available), to the LINE IN connector. Because the
audio automatically switches to [LINE IN], the audio is output simply by connecting the cable.
The display automatically distinguishes the timings shown in the table below, and sets the screen information. When a
PC or other device is connected, it automatically displays images properly. See ""Connecting with a digital video
source"" on page 29.