Step 3: Connecting The Power Cord; Step 4: Quick Setup; Playing Discs; Tel 13942296513 - Sony RMT-144A Servise Manual

QQ
3 7 63 1515 0

Step 3: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
The on-screen display differs depending on the player model.
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP."
appears at the bottom of the screen. If this
message does not appear, select
"QUICK" under "SETUP" in the Control
Bar to run Quick Setup (page 62).
TE
L 13942296513
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 ( B through D ). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 61 for using the Setup Display.
Audio Connection (pages 21 to 24)
A
• No additional settings are needed.
C-1
B-1
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 66).
• If the sound distorts even when the volume
is turned down, set "AUDIO ATT" to "ON"
(page 65).
B-2 C-2 D
• Set "DOWNMIX" to "DOLBY
SURROUND" (page 66).
• Set "DIGITAL OUT" to "ON" (page 66).
www
.
http://www.xiaoyu163.com
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
The available languages differ depending
on the player model.
LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
AUDIO: FRENCH
SUBTITLE: SPANISH
PORTUGUESE
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER: 4:3 LETTER BOX
4:3 PAN SCAN
BACKGROUND:
16:9
c continued
25
x ao u163
y
i
27
http://www.xiaoyu163.com
2 9
8
7
Press X/x to select the setting that
matches your TV type.
N If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 63)
N If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 63)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 ( through ).
D
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
B-2 C-2 D
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 ( B through D ).
Q Q
3 6 7 1 3 1 5
26

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
Power
indicator
H
DISC SKIP
1
Turn on your TV.
2
Press [/1.
The player turns on and the power
indicator lights up in green.
3
Switch the input selector on your
TV so that the signal from the
co
player appears on the TV screen.
N When using an amplifier (receiver)
Turn on the amplifier (receiver) and .
select the appropriate channel so that you
can hear sound from the player.
28
1-6
9 4 2 8
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: D-PCM
DOLBY DIGITAL
B-2 C-2
• D-PCM (page 66)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 66)
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
OFF
ON
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 ( B through D ).
B-2 C-2
• OFF (page 67)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 67)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
For Asian/Oceanian models only:
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust "MPEG"
setting (page 67).
0 5 8 2 9 9 4 2 8
4
Press A on the player, and place a
disc on the disc tray.
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
A
Disc
compartment
With the playback
number
side facing down
5
Press H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 33. For VIDEO CDs, see page 33.
To turn off the player
Press [/1. The player enters standby mode.
z Hint
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power Off function).
For U.S./Canadian models only:
The Auto Power Off function is set to off when you
purchase the player. You can turn the function on or
off by setting "AUTO POWER OFF" in
"CUSTOM SETUP" (page 64).
m
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
9 9
9 9