Outboard Motor; Flushing Device; Install Cowling - Yamaha LF115 Owner's Manual

3
2
1. Oil dipstick
2. Upper mark
3. Lower mark
EMU40412

Outboard motor

 Check that the outboard motor is mounted
properly and check the outboard motor
mounting bolts for looseness.
 Check the propeller for damage.
 Check for engine oil leaks.
EMU36494

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
garden hose connector is not properly
connected, cooling water can leak out and
the engine can overheat during operation.
[ECM01802]
3
1. Fitting
2. Garden hose connector
3. Flushing device
1
ZMU08088
2 1
ZMU08089
EMU36965

Install cowling

1. Be sure that all cowling lock levers are
released.
2. Be sure that the rubber seal is seated all
the way around the top cowling.
1
2
1. Top cowling
2. Rubber seal
3. Place the top cowling on the bottom
cowling.
4. Check to be sure the rubber seal is seat-
ed correctly between the top cowling
and the bottom cowling.
5. Move the cowling lock levers to lock the
top cowling as shown. NOTICE: If the
top cowling is not installed correctly,
water spray under the top cowling can
damage the engine, or the top cowling
can blow off at high speeds.
1. Cowling lock lever
Operation
ZMU08090
[ECM01992]
1
ZMU08091
59