Trailer towing equipment can be obtained at a
Yamaha dealer. (See page 6-7 for precaution in-
formation.)
1. Trailer hitch receiver
EBU19184
Auxiliary DC jack
The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running and the light switch is set to "OFF".
1. Set the light switch to "OFF".
2. Turn the accessory off.
3. Start the engine. (See page 6-1.)
4. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
1
1. Auxiliary DC jack cap
2. Auxiliary DC jack
Maximum rated capacity for the auxiliary DC
jack:
DC 12 V, 10 A (120 W)
5. Turn the accessory on.
6. When the auxiliary DC jack is not being used,
cover it with the cap.
4-25
1
2
4