Yamaha VERSITY VP300 Owner's Manual page 59

ZAUM0036
1. Spark plug wrench
3. Remove the spark plug as shown,
with the spark plug wrench
included in the owner's tool kit.
PERIODIC MAINTENANCE AND MINOR REPAIR
To check the spark plug
1
1. Check that the porcelain insulator
around the center electrode of the
spark plug is a medium-to-light
tan (the ideal color when the scoo-
ter is ridden normally).
NOTE :
If the spark plug shows a distinctly
different color, the engine could be
defective. Do not attempt to diagnose
such problems yourself. Instead, have
a Yamaha dealer check the scooter.
2. Check the spark plug for electrode
erosion and excessive carbon or
other deposits, and replace it if
necessary.
Specified spark plug:
DR8EA (NGK)
ZAUM0037
a. Spark plug gap
To install the spark plug
6-12
a
1. Measure the spark plug gap with
a wire thickness gauge and, if
necessary, adjust the gap to
specification.
Spark plug gap:
0.6 – 0.7 mm
2. Clean the surface of the spark
plug gasket and its mating sur-
face, and then wipe off any grime
from the spark plug threads.
3. Install the spark plug with the
spark plug wrench, and then
tighten it to the specified torque.
6