Yamaha F225F Owner's Manual page 87

TIP:
For more information on the disposal of

used oil, consult your Yamaha dealer.
Change the oil more often when operating

the engine under adverse conditions such
as extended trolling.
Changing the engine oil by draining the oil
1. Put the outboard motor in an upright po-
sition (not tilted). NOTICE: If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
[ECM01862]
2. Start the engine. Warm it up and keep
the idle speed for 5-10 minutes.
3. Stop the engine and leave it for 5-10
minutes.
4. Remove the top cowling.
5. Remove the screws.
1
1. Screw
6. Remove the bolts.
ZMU05843
1
1
1. Bolt
7. Remove the apron from starboard side
as shown in the illustration.
Maintenance
ZMU07956
ZMU07957
1
1
80