INSTRUMENT AND CONTROL FUNCTIONS
ard lights (simultaneous flashing of all
turn signal lights).
The hazard lights are used in case of
an emergency or to warn other drivers
1
when your vehicle is stopped where it
might be a traffic hazard.
2
CAUTION:
Do not use the hazard lights for an
3
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
4
5
6
7
8
9
Clutch lever
ECA10061
1. Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion
circuit
cut-off
page 3-20.)
3-10
EAU12820
Shift pedal
1
1. Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission equipped on
this motorcycle.
system.
(See
EAU12870
1