Keyless Entry - Ford 2017 EXPLORER Owner's Manual

Hide thumbs Also See for 2017 EXPLORER:
Table of Contents

Advertisement

Note: Allow the power system to open the
liftgate. Manually pushing or pulling the
liftgate may activate the system s obstacle
detection feature and stop the power
operation or reverse its direction. Manually
interfering with the liftgate motion may also
replicate a strut failure.
Note: Splashing water may cause the
hands-free liftgate to open. Keep the
intelligent access key away from the rear
bumper detection area when washing your
vehicle.

KEYLESS ENTRY

SECURICODE
Keypad
The keypad is near the driver window. It
illuminates when touched.
Note: If you enter your entry code too fast
on the keypad, the unlock function may not
work. Enter your entry code again more
slowly.
E138637
Explorer (TUB) Canada/United States of America, enUSA, Edition date: 03/2016, First Printing
Doors and Locks
Keyless Entry
You can use the keypad to do the
following:
Lock or unlock the doors.
Program and erase user codes.
Arm and disarm the anti-theft alarm.
Recall memory seat and mirror
positions.
You can operate the keypad with the
factory-set five-digit entry code. The code
is on the owner's wallet card in the glove
box and is available from an authorized
dealer. You can also program up to five of
your own five-digit personal entry codes.
Programming a Personal Entry Code
1.
Enter the factory-set five-digit code.
2. Press 1·2 on the keypad within five
seconds.
3. Enter your personal five-digit code. You
must enter each number within five
seconds of each other.
4. Press 1·2 on the keypad to save
personal code 1.
The doors lock then unlock to confirm that
programming was successful.
To program additional personal entry
codes, repeat steps 1 through 3, then for
step 4:
Press 3·4 to save personal code 2.
Press 5·6 to save personal code 3.
Press 7·8 to save personal code 4.
Press 9·0 to save personal code 5.
Hints:
Do not set a code that uses five of the
same number.
Do not use five numbers in sequential
order.
The factory-set code works even if you
have set your own personal code.
66

Advertisement

Table of Contents
loading

Table of Contents