Table of Contents
Advertisement
C
Driver temperature control: Adjust the temperature setting on the driver side.
D
Heated rear window: Press to switch the heated rear window on and off.
E
MAX Defrost: Press to switch on defrost. Outside air flows through the
windshield vents, air conditioning automatically turns on, and fan automatically
adjusts to the highest speed. You can also use this setting to defrost and clear
the windshield of a thin covering of ice. The heated front or rear window also
automatically turn on when you select maximum defrost.
Note: To prevent window fogging, you cannot select recirculated air when
maximum defrost is on.
F
Air distribution control: Press to switch airflow from the windshield,
instrument panel, or footwell vents on or off. You can distribute air through any
combination of these vents.
G
A/C: Press to switch the air conditioning on or off. Air conditioning cools your
vehicle using outside air. To improve the time to reach a comfortable
temperature in hot weather, drive with the windows open until you feel cold air
through the air vents.
Note: In certain conditions (for example, maximum defrost), the air conditioning
may continue to operate even though the air conditioning is switched off.
H
MAX A/C: Press for maximum cooling. Recirculated air flows through the
instrument panel vents, air conditioning automatically turns on and the fan
automatically adjusts to the highest speed.
I
Passenger temperature control: Adjust the temperature setting on the
passenger side.
J
DUAL: Press to switch on control for the passenger side of the vehicle.
K
Recirculated air: Press to switch between outside air and recirculated air. The
air currently in the passenger compartment recirculates. This can reduce the
time needed to cool the interior and reduce unwanted odors from entering your
vehicle.
Note: Recirculated air may also turn on and off automatically in instrument
panel or instrument panel and floor airflow modes during hot weather to improve
cooling efficiency.
L
Fan speed control: Adjust the volume of air circulated in the vehicle.
M
AUTO: Press to switch on automatic operation. Adjust to select the desired
temperature. Fan speed, air distribution, air conditioning operation, and outside
or recirculated air are automatically adjusted to heat or cool the vehicle to
maintain the desired temperature. You can also switch off dual zone mode by
pressing and holding for more than two seconds.
Explorer (TUB) Canada/United States of America, enUSA, Edition date: 03/2016, First Printing
Climate Control
129
Advertisement
Table of Contents
Troubleshooting
