Yamaha F100D Owner's Manual page 33

3. Multifunction display
4. Water detection warning indicator
5. Engine trouble warning/maintenance indica-
tor
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
NOTE:
The tachometer unit shows various kinds of
information according to the setting made us-
ing the " " (set) and "
For details, see the attached operation manu-
al.
Pre-operation checks
Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to "
(on).After all the displays come on and the to-
tal hour display comes on, the gauge will
change to normal operation. If the buzzer
sounds and the water separator-warning indi-
cator blinks, consult your Yamaha dealer im-
mediately.
NOTE:
To stop the buzzer, press the "
" " (mode) button.
Low oil pressure warning
When the engine oil pressure drops too low,
the low oil pressure-warning indicator will start
to blink, and the engine speed will automati-
cally decrease to about 2000 r/min.
" (mode) buttons.
"
" (set) or
Basic components
Stop the engine immediately if the buzzer
sounds and the low oil pressure-warning indi-
cator blinks. Check the engine oil quantity and
replenish oil if necessary. If the warning de-
vice has activated while the appropriate en-
gine oil quantity is maintained, consult your
Yamaha dealer.
ECM01600
CAUTION:
Do not continue to run the engine if the
low oil pressure warning device has acti-
vated. Serious engine damage will occur.
Overheat warning
If the engine temperature rises too high while
cruising, the overheat-warning indicator will
start to blink. The engine speed will automati-
cally decrease to about 2000 r/min.
ZMU05430
ZMU05431
27