Installing storage devices
You can install two 2.5-inch HDDs or SSDs (via the Vivo DualBay
adapter) or one 3.5-inch HDD as storage device for your VivoMini
barebone.
NOTE: The Vivo DualBay adapter in this manual is for reference only.
Installing 2.5-inch HDDs/SSDs
IMPORTANT: Ensure to turn off your VivoMini and disconnect all
cables and peripherals before installing any device or components.
To install 2.5-inch HDDs/SSDs to the Vivo DualBay adapter:
1.
Place the VivoMini on a stable and flat surface.
2.
Press down the latch at the rear panel to release the top cover
of the VivoMini.
3.
Slide the top cover towards the rear of VivoMini until it is
detached from the chassis.
VivoMini V Series Barebone
27