Pair/Unpair Cam; To Pair A Baby Unit To The Parent Unit - BT 1000 User Manual

40 Parent unit settings menu
If pairing fails, the screen will
display Pairing failed. Try the
pairing procedure again.
If you pair a new Baby unit to
an already occupied Baby unit
slot it will unpair the current
Baby unit.
Only one Baby unit can be
paired at a time.
If you have any problems
pairing or need additional
cameras, call us on 0808 100
6554* or go to www.bt.com/
mybabymonitor for more
information.
If you experience any problems, please call the Helpline on Freephone 0808 100 6554* or visit www.bt.com/producthelp

Pair/unpair CAM

The Parent and Baby unit supplied are already
paired but you can add or replace Baby units you
purchase separately. You can pair a maximum of
four Baby units to your Parent unit. Each new Baby
unit must be paired to the Parent unit before you
can use it.

To pair a Baby unit to the Parent unit

Firstly, make sure the Baby and Parent units are
turned on, see pages 25 and 26.
1. Press on the Parent unit.
2. Press or to highlight PAIR/UNPAIR
CAM, then press
3. Press or again to select Pair new CAM.
4. Press or to choose a Baby unit slot,
then press .
or .