Samsung DA68-02952C-01 User Manual page 27

( 4 ) Fridge/Power Cool (3sec)
The Fridge button serves two purposes:
- To set the Fridge to your desired
temperature.
- To turn the Power Cool function on and
off.
1) To set the Fridge temperature, press the
Fridge button. You can set the temperature
between 44 °F (7 °C) and 34 °F (1 °C).
2) Power Cool function
Touch and hold this button for 3 seconds to
decrease the time needed to cool products
in the Refrigerator. It can be helpful if you
need to quickly cool easily spoiled items or
if the temperature in the fridge has warmed
dramatically (for example, if the door was left
open).
( 5 ) Lighting/ºC ↔ ºF (3sec)
The Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units between
ºC and ºF
1) Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode so
that it stays on continuously. The button also
lights up. If you want the Dispenser lamp
to come on only when some one uses the
dispenser, press the Lighting button to turn
the continuous mode off.
2) To switch the temperature units between
ºC and ºF
Touch and hold this button for 3 seconds to
select the temperature display you want.
Each time you press and hold the button, the
ºC and ºF temperature modes alternate and
the ºC or ºF icon lights up, indicating your
selection.
DA68-02952C (EN)-01.indd 27
( 6 ) Ice Maker Off/Control Lock (3sec)
The Ice Maker Off button serves two
purposes:
- To turn the Ice maker on and off
- To turn the Control Lock Function on and
off.
1) Ice Off Function
If you don't want to make more ice, press the
Ice Maker Off button.
2) Control Lock Function
Touch and hold this button for 3 seconds to
lock the display, the Flex Zone panel, and
the dispenser buttons so the buttons can not
be used.
When Control Lock is on, the refrigerator
does not dispense ice or water, even if the
Dispenser Lever is pressed.
The Control Lock icon lights up to indicate
you've activated the Control Lock function.
Press 3 seconds to unlock.
( 7 ) Water
Touch this button to dispense water.
This mode can not be used with the Ice Type
mode simultaneously.
Water mode shuts off when you touch the
Cubed/Crushed Ice button.
( 8 ) Filter
Water filter usage
This icon lights up when you need to change
the filter, usually after the refrigerator has
dispensed about 300 gallons of water (after
about 6 months). The icon will blink red for
several seconds when you open or close the
door.
After you install the new water filter, reset
the filter indicator by touching and holding
the Hold 3 sec for Filter Reset button for
3 seconds.
- If water is not dispensing or
dispensing slowly, you need to
replace the water filter because the
water filter is clogged.
- Some areas have large amounts
of lime in their water, which causes
the water filter to clog more quickly.
( 9 ) Ice Type
Touch this button to select your desired
ice type. Cubed and crushed ice modes
alternate when you press the button.
This mode can not be used with the Water
mode simultaneously.
English - 27
2015. 8. 25. 9:27