Samsung DA68-02952C-01 User Manual page 19

Disassembling the refrigerator doors
Be careful not to drop and scratch the
doors while removing them.
WARNING
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver(+)
Pliers
(3/16") (5 mm)
With the door opened
1. Remove the 3 screws holding down the TOP
TABLE ( 1 ) and separate the connected wires.
DA68-02952C (EN)-01.indd 19
Flat-blade Socket wrench
screwdriver(-) (13/32") (10 mm)
Allen wrench
( 1 )
English - 19
2. Disconnect the two connectors ( 2 ) on the
left side door. To remove the water coupler
from the hinge, twist and pull it from the hinge.
Remove the water line ( 3 ) while pressing the
marked part ( 4 ) of the water line coupler.
( 2 )
( 3 )
( 4 )
3. Pull and remove the hinge lever ( 5 ). Remove
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
( 5 )
( 7 )
4. Lift the door straight up to remove.
( 6 )
2015. 8. 25. 9:27