Safety And Care; Safety Precautions; Caring For This Product; Getting Started - Oregon Scientific JMR868A User Manual

SAFETY AND CARE

SAFETY PRECAUTIONS

Please observe the following safety precautions when
setting up and using this product.
LCD panel - The LCD panel is made of glass, and
may break if the unit is dropped.
Heat sources - Keep the product away from heat
sources, such as radiators, stoves, heaters, and
other heat-generating products.
Water and moisture - Do not use the product in or
near water or in high moisture areas, such as a
bathroom.
Power source - The product may be susceptible to
power surges. It should be unplugged during severe
storms or whenever you will be away for a long
time. Only use the type of power source specified
in this manual. Do not overload power strips and
extension cords, as this can cause a fire hazard.

CARING FOR THIS PRODUCT

To ensure you receive the maximum benefit from using
this product, please observe the following guidelines.
Do not clean any part of the product with benzene,
thinner or other solvent chemicals - this may cause
permanent damage that is not covered by the
guarantee. When necessary, clean it with a damp
cloth.
Keep your product away from hot, humid conditions
or strong sunlight.
Every effort has been made to ensure the highest
standards of reliability for your clock with remote
nightlight. However, if something does go wrong,
please do not try to repair it yourself - consult your
supplier.
Do not use your product outdoors in the rain, or
handle it with wet hands - water can damage
electrical equipment.
JMR868A_EN_R6

GETTING STARTED

HOW YOUR CLOCK WORKS WITH THE
NIGHTLIGHT - OVERVIEW

PACKAGE CONTENTS

When you unpack
make sure you keep all the packing materials in a safe
place, in case you need to later transport the device or
return it for servicing.
In the box, you will find:

BATTERIES

The clock uses:
The nightlight uses:
NOTE It is recommended that you use alkaline
batteries with this product for longer performance.
To install the batteries, simply insert them making sure
they match the correct polarities (+ and -).
4
4
The clock can be set independently to give you
time, calendar and alarm facilities.
The nightlight can be set independently to light up
in the dark so you can see where you are going.
The clock and nightlight can also be used together
to turn the clock backlight on when you walk into a
dark room, or wave your arm from the comfort of
your bed. It can do this because the nightlight has
2 types of sensor. One sensor responds to light
and the other responds to movement. From the
clock unit you can set these sensors to be active
during a certain period of time.
your clock with remote nightlight,
Clock Unit
Remote Nightlight
4 x UM-3 / AA 1.5V Batteries for the Clock
3 x UM-3 / AA 1.5V Batteries for the Nightlight
4.5V AC Adapter
4 x UM-3 / AA 1.5V batteries.
3 x UM-3 / AA 1.5V batteries.
09/21/2004, 11:08