Paper Is Not Cut Cleanly; Cannot Read Barcode - Epson TM-C3400-LT Technical Reference Manual

Paper is Not Cut Cleanly

Symptoms /
Problem Condition
Paper is Not Cut Cleanly

Cannot Read Barcode

Symptoms /
Problem Condition
Barcode cannot be read
184
Verification Method / Countermeasures
Is the autocutter dirty?
If the fixed blade of the autocutter is dirty, clean the blade.
For details, see "Cleaning the Autocutter" on page
Verification Method / Countermeasures
Is the barcode reader properly connected?
Verify that the barcode reader is properly connected to a USB connector
on the rear of the product.
For details, see "Connecting the Cable" on page
If the print data contains the graphic data of a barcode, is the
barcode reduced?
If the barcode is reduced, lines may be faint and spaces may be crushed,
and as a result, it may not be read correctly.
Is the barcode difficult to read?
Print the barcode in cyan only.
For details, see "Printing the barcode in cyan only" on page
169.
37.
83.