Marker Beam Settings - PSC PowerScan Handheld Laser Scanner Programming Manual

Marker Beam
Settings
136
The Marker Beam feature provides the user with a spotter beam for
improved aiming at distant bar code labels and/or in extremely bright
environments. A Marker Beam can also be useful when scanning
through showcase glass or bar code menus containing bar codes
printed with little space between them.
To enable the Marker Beam:
1. Scan the SET bar code.
2. Scan the ENABLE MARKER BEAM bar code.
3. Scan the desired time duration setting for the Marker Beam to
be illuminated.
4. Scan the END bar code on
SET -------------------------------------------
Marker Beam Enable/Disable
Marker Beam Enabled
Marker Beam Disabled
Marker Beam Duration
0 Seconds
0.2 Seconds
0.3 Seconds
page 137.
---------
---------
---------
---------
---------
®
PowerScan Scanner