Toro 74656 Operator's Manual page 2

This product complies with all relevant European directives;
for details, please see the separate product specific Declaration
of Conformity (DOC) sheet.
Gross Horsepower
For models with stated engine horsepower, the gross
horsepower of the engine was laboratory tested by the engine
manufacturer in accordance with SAE J1995 and rated to
J2723. As configured to meet safety, emission, and operating
requirements, the actual engine horsepower on this class of
lawn mower will be significantly lower.
Go to www.Toro.com to view specifications on your mower
model.
This spark ignition system complies with Canadian ICES-002
Important: This engine is not equipped with a spark
arrester muffler. It is a violation of California Public
Resource Code Section 4442 to use or operate the engine
on any forest-covered, brush-covered, or grass-covered
land. Other states or federal areas may have similar laws.
Introduction
This machine is a ride-on, rotary-blade intended to be used
by homeowners in residential applications. It is primarily
designed for cutting grass on well-maintained lawns. It is not
designed for cutting brush, mowing grass and other growth
alongside highways, or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1
model and serial numbers on the product. Write the numbers
in the space provided.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
identifies the location of the
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
1
G014523
Figure 1
Under the seat
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
2),