Oil Change Indicator Reset; Engine Coolant Check - Lincoln 2017 MKC Owner's Manual

1. Remove the engine oil filler cap.
2. Add engine oil that meets Ford
specifications. See Capacities and
Specifications (page 344).
3. Wipe off any spilled oil.
4. Replace the engine oil filler cap. Turn it
clockwise until you feel a strong
resistance.
Note: Do not add oil further than the
maximum mark. Oil levels above the
maximum mark may cause engine damage.
Note: Soak up any spillage with an
absorbent cloth immediately.

OIL CHANGE INDICATOR RESET

Use the information display controls on the
steering wheel to reset the oil change
indicator.
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Maintenance
From the main menu scroll to:
Message Action and description
Settings Press the right arrow button,
then from this menu scroll to
the following message.
Vehicle Press the right arrow button,
then from this menu scroll to
the following message.
Oil Life Press the right arrow button,
then from this menu scroll to
the following message.
Hold OK to Press and hold the OK button
Reset until the instrument cluster
displays the following
message.
Reset Successful
When the oil change indicator
resets the instrument cluster
displays 100%.
Remaining Life
{00}%
291
Message Action and description
If the instrument cluster
displays one of the following
messages, repeat the
process.
Not Reset
Reset Cancelled

ENGINE COOLANT CHECK

Checking the Engine Coolant
WARNINGS
Do not add engine coolant when the
engine is hot. Steam and scalding
liquids released from a hot cooling system
can burn you badly. Also, you can be burned
if you spill coolant on hot engine parts.
Do not put engine coolant in the
windshield washer fluid container. If
sprayed on the windshield, engine coolant
could make it difficult to see through the
windshield.