Table of Contents
Advertisement
A
Driver temperature control: Adjust the temperature setting on the driver side. This control also adjusts the passenger side temperature
when you switch off dual zone mode.
B
Fan speed control: Adjust the volume of air circulated in the vehicle.
C
Passenger temperature control: Adjust the temperature setting on the passenger side.
D
MAX A/C: Press for maximum cooling. The driver and passenger temperature settings are set to LO. Recirculated air flows through
the instrument panel vents, air conditioning automatically turns on, and the fan automatically adjusts to the highest speed.
E
A/C: Press to switch the air conditioning on or off. To improve the time to reach a comfortable temperature in hot weather, drive
with the windows open until you feel cold air through the air vents. You can use A/C with recirculated air to improve performance
and efficiency.
Note: In certain conditions (for example, maximum defrost), the air conditioning may continue to operate even though the air
conditioning is switched off.
F
Recirculated air: Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates.
This can reduce the time needed to cool the interior and reduce unwanted odors from entering your vehicle.
Note: Recirculated air may also turn on and off automatically in instrument panel or instrument panel and floor airflow modes during
hot weather to improve cooling efficiency and reduce risk of fogging.
G
Heated seats: Press to switch the heated seats on and off. See Heated Seats (page 145).
H
Climate controlled seats: Press to switch the climate controlled seats on and off. See Climate Controlled Seats (page 146).
I
DUAL: Press to switch separate passenger side temperature control on and off. When dual zone is off, passenger temperature
settings remain the same as the driver settings.
J
AUTO: Press to switch on automatic operation. Adjust to select the desired temperature. Fan speed, air distribution, air conditioning
operation, and outside or recirculated air are automatically adjusted to heat or cool the vehicle to maintain the desired temperature.
You can also switch off dual zone mode by pressing and holding for more than two seconds.
MKC (TME) Canada/United States of America, enUSA, Edition date: 01/2016, First Printing
Climate Control
134
Advertisement
Table of Contents
Troubleshooting
