Accessing The 121.5 Mhz Emergency Frequency - Yaesu FTA-750 SPIRIT Operating Manual

Monitor Switch
When listening to a very weak signal from an aircraft or
ground station, you may observe the signal disappearing
periodically as the incoming signal strength becomes too
weak to override the squelch threshold setting.
To disable the squelch temporarily, press and hold the
SQL switch for 2 seconds. The squelch will remain
open and you should have a better chance of hearing
weak signals.
To return to normal operation, press the SQL momen-
tarily.

Accessing the 121.5 MHz Emergency Frequency

The FTA-750/FTA-550 can quickly access the
121.500 MHz emergency frequency. This function can
be activated even when the keypad lock function (de-
scribed on Page 46) is in use.
FTA-750/FTA-550 O
B o
asIc
M
perATing AnuAl
peratIon
 To access the emergen-
cy frequency, press and
hold the [ 121.5 ] key.
After four beeps, the
transceiver enters the
emergency mode and
the frequency is au-
tomatically tuned to
121.500 MHz.
 To exit the emergency mode, press the [ COMM ]
key. The message confirming the cancelation of the
emergency mode will appear. Press the [ ◄ ] or [ ► ]
key to select "YES", then press the [ ENT ] key.
121.500
EMG
EMERGENCY
VOL
132.400
134.800
127.600
119.150
124.250
129.200
21