Using A Flash Media Card - Lenovo thinkpad 13 User Manual

To start the camera, do the following:
• For Windows 7: Start the Communications Utility program. See "Accessing Lenovo programs" on
page 11.
• For Windows 10: Open the Start menu, and click Camera from the all apps list.
When the camera is started, the green camera-in-use indicator turns on.
You also can use the integrated camera with other programs that provide features such as photographing,
video capturing, and video conferencing. To use the integrated camera with other programs, open one of the
programs and start the photographing, video capturing, or video conferencing function. Then, the camera
will start automatically and the green camera-in-use indicator will turn on. For more information about using
the camera with a program, refer to the help information system of the program.
Configuring camera settings
You can configure the camera settings to meet your needs, such as adjusting the quality of the video output.
To configure the camera settings, do the following:
• For Windows 7: Start the Communications Utility program and configure the camera settings as desired.
• For Windows 10: Do one of the following:
– Open the Camera app, click the settings icon in the upper-right corner. Follow the instructions on the
screen to configure the camera settings as desired.
– Click Lenovo Settings from the Start menu. Then click Camera. Follow the instructions on the
screen to configure the camera settings as desired.

Using a flash media card

This section provides information about the supported flash media card type and instructions on how to
install or remove a flash media card. For more information about using the card, refer to the documentation
that came with the card.
Supported flash media card type
Your computer has a media-card slot, it supports the following cards:
• MultiMediaCard (MMC)
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
• Secure Digital eXtended-Capacity (SDXC) card
Note: Your computer does not support the content protection for recordable media (CPRM) feature
for the SD card.
Installing or removing a flash media card
Attention: Before installing or removing a flash media card, ensure that you observe the following
precautions:
• Before you start, read "Static electricity prevention" on page 101.
• During the data transfer, do not put your computer into sleep or hibernation mode and do not perform any
installation or removal actions. Otherwise, your data could get damaged.
• Do not remove a smart card while the computer is in sleep or hibernation mode. Otherwise, the system
might not respond when you try to resume operation.
.
Chapter 2 Using your computer
33