VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Installation
Hard Disk installation
Before using the Network Video Recorder, please prepare SATA hard disk(s) for
recording video.
1. Make sure the power is disconnected.
2. Secure the supplied rack mount ears if you want to install into a rack cabinet.
3. Open the drive tray bezel as shown below and remove the drive tray.
4. Install hard disks to the disk trays by securing it with the supplied four screws.
5. Open the bezel of the drive tray as shown below and insert your hard
disk(s) into the disk bays.
6. Use the supplied bezel key to lock the drive trays in place to prevent unauthor-
ized access.
2
3
5
NOTE
► Please remember to format the hard disks before starting recording. Please refer to Storage on
page 48.
8 - User's Manual
4
6