Lan - Vivotek NR8201 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

LAN

This page allows user to configure LAN configuration for the Network Video Recorder. It
contains two columns: "LAN" and "DHCP Server."
LAN / DHCP Server
The NVR server comes with an embedded DHCP server for connecting 4 or 8 "LAN" ports to
network cameras. This page allows Administrators to configure network configuration for those
LAN ports. The configuration menu contains two columns: "LAN" and "DHCP Server." In LAN,
the default IP Address for the NVR server is
for the initial configuration). The default Subnet Mask is 255.255.255.0.
If you connect network cameras to NVR as diagrammed below, the embedded DHCP server will
automatically assign IP addresses to the 4 (NR8201) and 8 (NR8301) cameras (192.168.100.2
~ 192.168.100.254), while the NVR server itself takes up the first address.
IP address: 192.168.100.5
Subnet mask: 255.255.255.0
IP address: 192.168.100.4
Subnet mask: 255.255.255.0
28 - User's Manual
192.168.100.1 (used only when using a LAN port
NVR Server
IP address: 192.168.100.1
Subnet mask: 255.255.255.0
RESET
LAN
IP address: 192.168.100.3
Subnet mask: 255.255.255.0
IP address:
Subnet mask: 255.255.255.0
Subnet 0 Subnet 1
WAN
LAN4 LAN3 LAN2 LAN1
1 2 3 4 5 6 7 8 9 10 11 12
IP address:
Subnet mask:
192.168.100.2
NR8201
LAN/WAN
(Determined by users'
network environment)