6. Start the programme - the end of a programme
Starting the programme
Touch the flashing Start/Stop sensor.
The door will lock (the symbol will
appear in the display to show this) and
the programme will start.
The programme status will appear in
the display.
Cottons
Temperature
Spin speed
1
Main wash
Change
The washing machine lets you know
which section of the programme has
been reached and the programme
duration remaining . If a delay start
time has been selected, then this will
appear in the display.
The drum lighting switches off once the
programme has started.
At the end of a programme
The door is still locked during the anti-
crease phase and the following will ap-
pear alternately in the display:
crease
and
Finished
The following information will also ap-
pear:
Press the Stop button, then unload
the drum.
Touch the Start/Stop sensor. This will
unlock the door.
The door unlocks automatically at the
end of the anti-crease phase.
10:30
60 °C
1600
rpm
1:45
h
2
Anti-
.
Pull open the door.
Remove the laundry.
Check that all items have been re-
moved from the drum. Items left in
the drum could discolour other items
in the next wash or become discol-
oured themselves.
Save
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Switch the washing machine off with
the button.
Close the door. Otherwise there is a
danger of objects being placed inad-
vertently in the drum. If these re-
mained unnoticed and were washed
in the next load, they could damage
the laundry.
If applicable, remove the used cap-
sule from the detergent dispensing
drawer.
41