Buzzer Volume; Keypad Tone; Total Consumption; Code - Miele WMV 960 WPS Operating Instructions Manual

Buzzer volume

You can select one of seven different
settings for the buzzer volume.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.

Keypad tone

Each touch of a sensor is confirmed
with an audible tone.
Factory default setting: the keypad tone
is switched on.

Total consumption

In this setting you can check the
saved energy and water consumption
values and enter the energy cost.
Options
– Display
Shows the sum of the energy and the
sum of the water used by the previ-
ous programmes.
– Set the cost
You can enter the cost for energy
(electricity) and water.
– Reset function
The energy consumption and water
consumption totals are reset to zero.

Code

The code prevents the washing ma-
chine being used without your know-
ledge.
Options
– Activate
The code is 125 and can be activ-
ated.
When the code has been activated,
you have to enter the code after
switching the washing machine on.
Otherwise the washing machine can-
not be operated.
– Deactivate
For using the washing machine
without entering the code. This only
appears if the code has been activ-
ated previously.
– Change
You can enter a code of your own.
Important. Make a note of your new
code. If you forget the code, the
washing machine will need to be un-
locked by Miele Service.

Temperature unit

The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
Factory default setting: Celsius (°C).
Settings
109