Planet WNRT-300 Quick Installation Manual page 8

802.11n wireless portable ap/router

Hide thumbs Also See for WNRT-300:

2. If you cannot obtain an IP address

Note

Please follow the instructions below to configure the

WNRT-300.

automatically from WNRT-300, please

refer to the next two figures and follow

the procedures below to referconfigure

the network connection.

Step 1. Click "Start" button located at

lower-left corner of the screen.

Step 2. Click "Control Panel".

Step 3. Click "Network and Internet

Connections".

Step 4. Click "Network Connections".

Step 5. Right-click "Wireless Network

Connection" or "Local Area

Connection",

"Properties".

Step 6. Select

(TCP/IP)" and click "Proper-

ties" button.

Step 7. Select "Obtain an IP address

automatically" and "Obtain

DNS server address auto-

matically", then click "OK".

and

"Internal

Protocol

choose

Table of Contents