Yaesu FTM-3200DR Advance Manual page 29

14 DSQ TYPE
Function: Sets the squelch type in digital mode.
Available Values: CODE / BREAK / OFF
Default: OFF
CODE: Outputs sound only when receiving signals containing the SQL CODE
corresponding to the code you setting.
BREAK: Regardless of the SQL CODE setting, outputs sound when the partner station
transmits with the BREAK setting activated.
OFF: Outputs sound whenever receiving digital signals from Yaesu transceivers.
15 DT AUTO
Function: Enables/Disables the DTMF Autodialer feature.
Available Values: MANUAL / AUTO
Default: MANUAL
16 DT DELAY
Function: Setting of the DTMF Autodialer's TX Delay Time.
Available Values: 50 / 250 / 450 / 750 / 1000 ms
Default: 450 ms
17 DT SET
Function: Loading of the DTMF Autodialer Memories.
See page 11 for details.
18 DT SPEED
Function: Setting of the DTMF Autodialer Sending Speed.
Available Values: 50 (high speed) / 100 (low speed) ms
Default: 50 ms
19 DW RVRT
Function: Enables/disables the "Priority Channel Revert" feature.
Available Values: ON / OFF
Default: OFF
See page 21 for details.
20 GM RINGR
Function: Enables/Disables the alert sound when detecting stations within communication
range.
Available Values: IN RANGE / ALWAYS / OFF
Default: IN RANGE
IN RANGE: Beeps sound only when the radio first detects a station within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other
station.
OFF: No alert beeps sound.
FTM-3200DR Advance Manual
Menu Selection Details
29