Assembly; Attach The Hose/Handle; Attach The Floor Nozzle - Oreck Steam-All Canister STEAM200 User Manual

Assembly

Tip!
See page 12
to determine the
correct attachments
for your cleaning
job.
Floor nozzle

Attach the Hose/Handle

1. Pull the hose inlet flap down.
. Line up the keyway on the hose/handle with the socket of
the Steam-All™ Steamer.
3. Push the keyway into the socket.
Plug
Keyway on
hose/handle
Hose inlet flap

Attach the Floor Nozzle

1. Position the floor nozzle adaptor so the tube portion is
pointing down.
. Insert floor nozzle adaptor into the floor nozzle and rotate
the adaptor so the tube is now pointing up.
3. Pull on the floor nozzle adaptor to make sure it is locked.
4. Place the floor nozzle assembly on the hose/handle, or
extension tube until they are locked together.
You will hear a click and the yellow interlock
should be in the hole on the attachment.
Floor nozzle
adaptor tube
9
! WARNING!
To reduce the risk of personal injury,
unplug the power cord from the electrical
outlet and let the unit/accessories cool
down completely before handling.
Extension
tube
Floor nozzle assembly