Table of Contents
Advertisement
Picture menu provides the following options:
IDEO
ODE
—Allows you to optimize the projector's display mode: PC, Bright, sRGB
V
M
(provides more accurate color representation), Movie, and Custom (set your preferred
settings). If you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
NOTE:
If you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
RIGHTNESS
B
—Use
ONTRAST
C
—Use
S
ATURATION
—Allows you to adjust the video source from black and white to fully
saturated color. Press
increase the amount of color in the image.
S
HARPNESS
—Press
T
INT
—Press
to increase the amount of green in the image and
amount of red in the image (Selectable for NTSC only).
W
HITE
I
NTENSITY
—Set 0 to maximize the color reproduction and 10 to maximize the
brightness.
EGAMMA
D
—Allows you to adjust among the 4 preset values (1, 2, 3, 4) to change the
color performance of the display.
OLOR
EMP
C
T
—Allows you to adjust the color temperature. The screen appears cooler at
higher color temperatures and warmer at lower color temperatures. When you adjust
the values in the Color Adjust menu, the Custom mode is activated. The values are
saved in the Custom mode.
OLOR
DJUST
C
A
—Allows you to manually adjust the red, green, and blue colors.
IGNAL
YPE
S
T
—Manually select signal type Auto, RGB, YCbCr, or YPbPr.
18
Using Your Projector
Downloaded from ProjectorsManual.com Manuals
and
to adjust the brightness of the image.
and
to adjust the display contrast.
to decrease the amount of color in the image and
to decrease the sharpness and
to increase the sharpness.
to increase the
to
Advertisement
Table of Contents
