Using Your Projector; Turning Your Projector On; Turning Your Projector Off - Dell M109S User Manual

Using Your Projector

Turning Your Projector On

NOTE:
blinks blue until pressed.
Connect the multi-input cable into the projector.
1
Connect the multi-input cable with the power cord and appropriate signal cables. For
2
information about connecting the projector, see "Connecting Your Projector" on
page 7.
Press the Power button (see "Using the Control Panel" on page 14 to locate the Power
3
button).
Turn on your source (computer, DVD player, etc.). The projector automatically
4
detects your source.
The Dell Logo will continue for 10 seconds while power on.
5
If the "Searching for signal..." message appears on the screen, ensure that the
appropriate cables are securely connected.
If you have multiple sources connected to the projector, press the Source button on
the control panel to select the desired source.

Turning Your Projector Off

NOTICE:
following procedure.
Press the Power button.
1
Press the Power button again. The cooling fans continue to operate for 10 seconds.
2
Disconnect the AC adapter from the multi-input cable.
3
Disconnect the multi-input cable from the projector.
4
NOTE:
Power Button to Turn off Projector" message appears on the screen. To clear the
message, press the Menu button on the control panel or ignore the message; the
message disappears after 30 seconds.
Downloaded from ProjectorsManual.com Manuals
Turn on the projector before you turn on the source. The Power button light
Unplug the projector after properly shutting down as explained in the
If you press the Power button while the projector is running, the "Press
Using Your Projector
11