Table of Contents
Advertisement
Date/Time
Synchronizing the Multi-Homing Gateway with the System Clock
Admin can configure the FBR-2000 Multi-Homing Gateway date and time by either syncing
to an Internet Network Time Server (NTP) or by syncing to your computer clock.
Follow these steps to sync to an Internet Time Server
Step 1.
Enable synchronization by checking the
Step 2.
Click the down arrow to select the offset time from GMT.
Step 3.
Enter the Server IP Address or Server name with which you want to
synchronize.
Step 4.
Update system clock every 5 minutes You can set the interval
time to synchronize with outside servers. If you set it to 0, it means
the device will not synchronize automatically.
Follow this step to sync to your computer clock.
Step 1.
Click on the Sync button.
Click the OK button below to apply the setting or click Cancel to discard
changes.
box.
- 17 -
Advertisement
Table of Contents
