Sanyo W51SA Basic Manual page 78

2
Use
Enter the Lock No. and press
3
Use
Use
4
Enter a Quick Unlock Key and press
Press
Information
If the battery runs out while the FeliCa Lock is turned ON, it will not be
•
possible to release the lock. You should, therefore, pay due attention to
the battery level. If the battery does happen to run out while the FeliCa
Lock is activated, first recharge the battery and then release the lock.
" " is displayed in the standby screen when the FeliCa Lock is turned ON.
•
If you happen to lose your W51SA, you can activate the FeliCa Lock by
•
turning ON the Remote Ctrl Lock. To enable this function, it is necessary
to set the Remote Ctrl Lock in advance.
Even if you have not set the Remote Ctrl Lock in advance, it is possible to
•
turn ON the Auto Lock, FeliCa Lock and Address Book Restriction
functions using the Security Lock Service.
The FeliCa Lock cannot be activated by turning ON the Auto Lock.
•
Temporarily Releasing the FeliCa Lock
■
a
With the FeliCa Lock turned ON, press
the standby screen is displayed.
b
Enter the Quick Unlock Key or the Lock No. and press
Information
The FeliCa Lock will be reactivated when you press
•
second or once the "Unlock for" is reached (set to 5 min. at the time of
purchase).
76
j
to select "ON" and press
The Lock No. is set to "1234" at the time of purchase.
j
to select "Quick Unlock" and press
j
to select "ON" and press
Z
(Save).
The Quick Unlock Key can be entered by pressing up
NudW+YZRh
to 4 of the
c
(Set).
c
(OK).
c
(Select).
c
(Set).
keys.
r
for more than one second while
c
r
for more than one
c
(Select).
(OK).