Mount Temperature/Humidity Sensor; Care And Maintenance; Warranty And Support - La Crosse Technology C85845 Instructional Manual

Mount Temperature/Humidity Sensor

Insert the mounting screw through the front of the
•
sensor and into the wall.
Tighten the screw to snug (do not over tighten).
•
Mount the sensor on a north-facing wall or in any well
•
shaded location. Sun will make it read high.
Under an eave or deck rail is preferred.
•
Be sure the outdoor sensor is mounted vertically to drain
•
moisture.
The maximum wireless transmission range is over 300
•
feet (91 meters) in open air, not including walls or floors.

Care and Maintenance

• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to
battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an
extended period of time.
• Promptly remove expired batteries.

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date
of purchase) on this product relating to manufacturing
defects in materials & workmanship.
Before returning a product, please contact our friendly
customer support with questions or visit our online help:
Phone: 1-608-782-1610
Online Product Support:
www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
Warranty Address:
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601
Protected under U.S. Patents: 5,978,738 | 6,076,044 | RE43903
Page | 9 www.lacrossetechnology.com/support C85845