Olympus WS-331M Instructions Manual page 17

7 · · · '
Press the STOP button to close the menu.
•. If it is set to "On", ~
will appear on the display.
®
VCVA (Variable Control Voice Actuator) indicator
1201120
•
OOMOOS
1H27M53s
•
Standb
VCVA Level
a
2
3:1:11 1211121
E!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!~~IF
ii"
I L l
~RI
©.....=========.
o
Press the REC button to start recording.
o
When the sound volume is lower than the preset
.. threshold sound level, recording automatically stops after
1 sec approximately, and "Standby" flashes on the
display. The record/play indicator light glows red when
recording starts and flashes when recording pauses.
Q
Press the
~
or
~
button adjust the pause
V
sound level.
The VCVA level can be set to any of 15 different values.
The higher the value, the more sensitive the recorder to
sounds. At the highest value, even the faintest sound
will activate recording.
The VCVA pause sound level can be adjusted according
to the ambient (background) noise.
@
Level meter (varies according to the sound volume being
recorded)
®
Start level (moves to the right/left according to the set level)
• The start/stop actuation level also varies depending on the selected microphone sensitivity mode (1lW P.19).
• If the starting level is not adjusted within 2 seconds, the display will return to the previous.
• If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the
recording situation.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
17