Quality Of Service
In the WS 2000 Wireless Switch, QoS is achieved by prioritizing voice traffic over data
traffic. To prioritize voice traffic over data traffic in the Access Port traffic queues,
enable voice prioritization in wireless QoS.
Commands
Voice prioritization
Configuring QoS through the CLI
Voice prioritization is enabled by default in the wireless switch.
The following commands show the configuration.
admin>
admin>network
admin(network)>wlan
admin(network.wlan)>set vop 1 enable
admin(network.wlan)>show wlan 1
wlan name
ess identifier
wlan mode
subnet
vlan_id
enc type
auth type
voice prioritization
disallow mu to mu
answer broadcast ess
secure beacon mode
default mu acl mode
default ap adopt mode
multicast address 1
multicast address 2
PN: 72-9954-00-A.doc
Default Settings
Enabled
: WLAN1
: spectralink
: enable
: s1
: 1
: none
: none
: enable
: disable
: disable
: disable
: allow all
: allow all
: 01005E000000
: 09000E000000
Required settings
Enabled
Page 8