1.12.3
Workpiece measurement at one point
CYCLE978 permits measurement at one point of a surface.
The measuring point is approached paraxially in the active workpiece coordinate system.
Depending on the measuring variant, the result may influence the selected tool offset or zero
offset.
Workpiece measurement: Blank measurement
Result:
● Position
● Deviation
● Zero point offset
Workpiece measurement: 1-point measurement
Result:
● Actual dimension
● Deviation
● Tool offset
Measuring cycles
Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0
1.12 Overview of measuring cycle functions for milling technology
General
47