Battery Led Panel - Qualcast CLMB3634M Instruction Manual

Operating Instructions & Tips
Charger LEDs (continued)
The iPower intelligent charger measures the charge level of the battery and charges the battery
accordingly with the required current and voltage based on battery temperature and voltage. This
ensure maximum battery life charge it fully before storage.
A flashing red LED light on the charger indicates that the battery temperature is not within the
charging temperature range of -5 °C– 50 °C or the charging current is too high. As soon as the
permitted temperature and the charging current ranges are reached, the battery charger will
automatically switch to charging.
After continuous or repeated charging cycles without interruption, the charger may warm up. This is
normal and does not indicate a technical defect of the battery charger.

Battery LED Panel

The battery is equipped with a charge-level indicator panel which indicates its' charge condition. This
charge-level indicator panel consists of 4 LEDs on the battery. Press and hold the charge indicator
button on the battery to actuate the charge level indicator. The charge level indicator LEDs goe out
after releasing the button. The battery's charge level can be checked either when the battery is fitted
on the machine or removed from the machine.
LED indicators on battery
Continuous lighting of 4 LEDs (inc 2 green)
Continuous lighting of 3 LEDs (inc 1 green)
Continuous lighting of 2 LEDs (orange & red)
Continuous lighting of 1 LED (red only)
18
Battery Capacity
Fully charged
≥ 50%
≥ 25%
≤ 25%. Recharge required.
Customer Helpline 08456 400 800