Side Connections - Pioneer DDJ-WeGO2 Operation Manual

23. HEADPHONES MIX: Controls the Headphones Mix of VirtualDJ. At left position (0%)
only the selected deck(s) from the CUE (PFL) buttons of the mixer will be outputted
to the Headphones Channel. At right position (100%) only the Master Output will be
outputted. In all other positions, both the CUE decks and the Master Output will blend
to the Headphones Channel.
24. HEADPHONES VOLUME: Controls the level of the Headphones Output Channel.
The knob is not controlling the Headphones Output level of the software mixer
(Hardware operation), therefore it will not move the corresponding knob in the
VirtualDJ GUI.
25. MIC VOLUME. Controls the level of the Microphone Input. The Microphone Input is
not handled by the software (Hardware Operation), therefore no Microphone
Operation is available via the VirtualDJ GUI.
26. MASTER VOLUME: Adjust the level of the Master Output. The knob is not controlling
the Master Output level of the software (hardware operation), therefore it will not
move the corresponding knob in the VirtualDJ GUI.
D. Side connections
27. USB. This USB connection
sends and receives audio and
control information from a
connected computer.
28. ON/OFF: Turn
WeGO2 on/off. The unit is
USB powered (no AC adaptor
is required).
29. PHONES SOCKET. Connect
your 1/4" or 1/8" headphones
to this output for cueing and
mix monitoring.
30. MIC INPUT. Connect a 1/4" microphone to this input. This input's audio signal is
routed directly to the Master Output of the DDJ-WeGO2 and its level is controlled by
the MIC VOL knob at the top panel.
31. MASTER OUTPUT (RCA): Use standard RCA cables to connect this output to a
speaker or amplifier system. The level of this output is controlled by the Master knob
on the top panel.
VirtualDJ 8 – Pioneer DDJ-WeGO2
the DDJ-
DDJ-WeGO2 side connections
9